本人剛學,感覺什么都是似懂非懂的,想編個簡單的程,也無從下手,就算編了,也不知道對不對,求好心人幫忙

另外有沒有好心人幫忙編個簡單的三個氣缸動作的程式 (送料   壓入    切斷  )

I/O點    有料感應,也就是說,必需有料,才會送料   x0
                  送料       氣缸原點感應 x1       動作后感應   x2                   氣缸控制送料,(電磁閥通斷來控制氣缸)         y 1
                  壓入                x3                 x4                                                                                                             y2
                   切斷                x5                  x6                                                                                                           y3
                      
     啟動         x11            停止   X12                手動/自動     X13      
        手動送料 X14   手動壓入 X15   手動切斷 X16


         另外動作就是  一按啟動  先確認有料感應是否有料, 沒料不動作        

時序圖大概是    送料  y1  _/``````````````````````````````````\_____
                          壓入  y2  __________/``````````````````\_____
                          切斷  y3  __________/``````````````````\______

即壓入和切斷時,送料氣缸 X2  必需為接通狀態

仿真軟件從這里下載： http://24x7lending.com/thread-gkfid-56.html

程序問題起碼請您動手寫一下，就算不對也能從中學到很多東西。積累經驗就是從不斷犯錯來進行的！

引用

引用第5樓longfei1982于2009-07-06 20:16發表的  :
我做了個，你看看行不，不行就當我飄過啊

5樓處理好雙線圈就差不多了。否則不能正常實現動作！